丈量原理 Measurement Principle
3D 白光 PSLM PMP (可编程布局光栅相位调制表面丈量技能,俗称摩尔条纹技能)
3D white light PSLM PMP(Programmable Spatial Light Modulation,commonly known
as moire fringe technology)
丈量项目 Measurements
体积,面积,高度,XY偏移,外形 (volume,acreage,height, XY offset, shape )
检测不良范例
Detection of Non - Performing Types
漏印、少锡、多锡、连锡、偏位、外形不良、板面净化
(missing print,insufficient tin, excessive tin, bridging, offset, mal-shapes, surface
contamination)
相机像素 Camera Pixel
5M,可选4M/8M/12M (4M/8M/12M as option)
镜头范例 Lens Types
远心镜头telecentric lens
镜头剖析度 Lens Resolution
15um,可选8/10/13/18/20um (8/10/13/18/20um as option)
视野尺寸 FOV Size
38.4*30.6mm###4.5/33.3*26.5/46.1*36.7/51.2*40.8mm)
精度 Accuracy
XY剖析度(XY Resolution):1um;高度(height):0.37um
反复精度 Repeatability
高度:小于1um (4 Sigma);体积/面积:小于1%(4 Sigma)
height:<1um (4 Sigma);volume/acreage:<1%(4 Sigma)
检测反复性 Gage R&R
远远小于10% (far less than10%)
FOV速率 FOV Speed
0.3s/FOV
检测头数目
Quantity of Inspection Head
Twin-Heads(Single Head 、Tri-Heads as option)
红绿蓝/RGB 三色光源Red Green Blue/RGB Three
Colas Option Light Source
标配standard configuration
基准点检测工夫 Mark-point Detection T
0.5秒/个 (0.5sec/piece)
Z轴及时起落赔偿板弯Compensation Plate Bending
of Real-time Lift in Z-axis
标配standard configuration
大检测高度
Maximun Meauring Height
±550um ( ±1200um as option)
镜头范例 Lens Types
长焦镜头,可选远心镜头telephoto lens, telecentric lens as option
弯曲PCB大丈量高度
Maximun Measuring Height of PCB Warp
±3.5mm (±5mm as option)
小焊盘间距 Minimum Pad Spacing
100um (焊盘高度为150um的焊盘为基准pad height of 150um as the reference)
小丈量巨细 Smallest Measuring Size
长方形(rectangle):150um;圆形(round):200um
大PCB载板尺寸
Maximum Loading PCB Size
双轨形式(dual-track model):50*50~630 x 300 mm
单轨形式(single track model):50*50~630 x 590 mm
PCB板厚度 Thickness of the PCB
0.4-7mm
零件高度限定
Height Limitations of the Parts
上40mm,下40mm (up:40mm down:40mm)
板边距
Board Edge Distance
3mm ,可选夹边 multifunctional clip edge as option
定动轨设置 Flixble or Fixed Orbit Setting
*标配1、4导轨牢固,2、3轨运动;1、4轨导间间隔为686mm;1、2与3、4轨导间
大间隔辨别是300mm。*可选配1轨牢固,2、3、4轨运动;
*standard configuration:track 1 and track 4 are fixed, track 2 and track 3 are flexible ,
the distance between track 1 and track 4 is 686mm, and the maximum distance
between track 1 and track, track3 and track 4 are 300mm.
*track 1 fixed, track 2,3,4 flexible as option
PCB传送偏向 PCB Transfer Direction
左到右或右到左,出厂前设定left to right or right to left, set before delivery
轨道宽度调解 Orbit Width Adjustment
有两根轨道可主动调宽,出厂前设定( two tracks can automatically adjust the width,
set before delivery)
SPC统计数据 SPC Statistics
Histogram;Xbar-R Chart;Xbar-S Chart;CP&CPK;%Gage Repartability Data;
SPI Daily/Weekly/Monthly Reports
Gerber和CAD导入
Gerber & CAD Data Imput
支持Gerber款式(274x,274d)(support Gerber format);人工Teach形式
(manual Teach model) ;CAD X/Y,Part No.,Package Type等导入 (CAD X/Y,
Part No.,Package Type imput)
文章泉源:j9九游会
深圳市j9九游会电子科技有限公司
###5 >###
###@qq.com QQ:2850293608
>###宏发产业园(宏发电子厂) 17栋五层 13栋二楼
Copyright © 深圳市j9九游会电子科技有限公司 All rights reserved
要害词:深圳smt加工 smt贴片加工 smt加工场家 smt贴片加工场家 深圳贴片加工场 pcba贴片加工场 smt打样加工
扫一扫,更多精美